FAQs

General questions

If a thick layer of putty is applied there is a possibility of cracks developing after a period of time.

 
You need to allow a curing period of 45 days for exteriors, and 3-6 months for interiors.
ink is designed to stay on whatever surface you apply it to, when pen marks stain clothing and fabric, machine washing won’t be enough to get the stain out. Instead, you need to use a special stain pretreating technique prior to machine washing, starting with clear alcohol-based hand sanitizer gel.

Make a solution of 1 cup of vinegar and 1 cup of water in a pan and heat it to boil. Dip a cloth into the solution, spread it over the paint, and wait for some time for it to soften. Use a pad or nylon brush to scrub off the paint. Use a paint remover on the floor if the paint does not come off.

When stored properly, an unopened can of latex or oil-based paint should have a shelf life of 2 years. The best storage for paint is in a cool, dry area, away from extreme hot and cold temperatures. Paint should never be allowed to freeze and should be stored away from furnaces and other heat-generating

While distemper paint can be directly applied to the cemented walls, the same isn’t possible for emulsion paints. You have to apply them over a coating of primer or putty. Other than that, emulsion paint is expensive too. On the other end, distemper paints are not as durable as emulsion.

Other questions

Electronic devices contain heavy metals that can be toxic to humans and wildlife if disposed of improperly. Of particular concern is the metal lead. Some TVs and monitors can contain as much as eight pounds of lead each. Lead is very harmful to many of the body’s tissues and organs, including the heart, kidneys, intestines, and bones. It can also impede vital reproductive and nervous system functions.

  • Give your e-waste to the nearest authorised e-waste collection centres/recyclers
  • Call to the producer/ manufacturers for e-waste collection
  • Participate in Producers’ e-waste take-back programme
  • Contact to the dealer for e-waste collection
  • Participate in E-waste Awareness programme of MeitY for more information

Bluetooth devices are expected to cost $20 initially (first half of 2000); but will drop to around $5 with widespread adoption and economies of scale. 

  1. Figure out what kind of charger is used to charge. Please use other charging cables to charge. 
  2. The light is on or not when charging?
  3. It could be a battery problem if the light still isn’t on after charging the headphone for more than 30 minutes.  

As with most computer errors, your first step is to shut down your computer and restart it. This will help you determine whether or not you actually have a hard disk problem. If the disk is severely damaged then your computer will probably fail to restart properly. If this is the case then contact MCWare IT Solutions, this is a job for the professionals.

If two RAM sticks are installed in one slot, then the computer will only use one of them. The other RAM stick will be ignored.